Need Your Spa or Hot Tub hooked Up?
WIREWORKS ELECTRICAL SERVICES LTD
Spa & Hot Tub Electrical Hook-Up Specialists
Spa & Hot Tub Hook Up for private use is not a complicated set up for most homes. For proper installation and hook up these are the 4 things to remember:
Your installers will require access to the backyard
You will need a solid and level place to set the hot tub or spa
Proper electrical setup to run your new toy
Lastly, a garden hose in close proximity to fill it up when installation is completed.
In most cases, a building permit is required for a hot tub & spa's with depths greater than 600 mm. On top of the permit, your city may require a site plan indicating the proposed location along with other bits of information such as fencing and/or lockable covers.
Note: Fencing is not always required when the hot tub has a lockable cover that can support the weight of an adult.
An electrical permit will be required for any wiring associated with the hot tub & spa installation. Hot tubs either require 110V or 220V of electricity. If you have a 110V model then you may be able to simply plug the spa into an electrical outlet in the backyard. However, if you have a 220V model, then you will need to work with a certified electrician. Your electrician will need to ensure 2 things. First that there is enough electricity to power the hot tub and second, run the appropriate wires from your electrical panel to the hot tub.
Wireworks Electrical Services Ltd. is the local leading hot tub hook up specialist for Sherwood Park, Fort Saskatchewan, St. Albert, Edmonton and surrounding areas.