Hot Tub & Spa Installation | Edmonton, Sherwood Park and Fort Saskatchewan
Hot Tub & Spa Installation for private use is pretty simple to set up. You need to make sure that you have access to the backyard; a solid, level place to set the hot tub or spa; electricity and a garden hose in close proximity to fill it up when installation is completed.
In most cases a building permit is required for a hot tub & spa's with depths greater than 600 mm. Your city may require a site plan that shows the proposed location along with information such as fencing and/or lockable covers. Fencing is not always required when the hot tub has a lockable cover that can support the weight of an adult.
An electrical permit is required for any wiring associated with the hot tub & spa installation. Hot tubs either require 110V or 220V of electricity. If you have a 110V model then you may be able to simply plug the spa into an electrical outlet in the backyard. However, if you have a 220V model, then you will need to work with a certified electrician. Your electrician will need to ensure there is enough electricity to power the spa and run the appropriate wires from your electrical panel to the hot tub.
Wireworks Electrical Services Ltd. is a leading electrical contractor with over 20 years electrical experience; providing excellent service for your Hot Tub & Spa Installation for Edmonton, Sherwood Park and Fort Saskatchewan areas. Our team of Certified Journeyman Electricians are amped to earn your business!